That’s it! You can reboot your Nokia 2.4.Once the flashing process completes, you will find a green button which means a successful upgrade.

You need to wait for a few minutes to complete the upgrade process.

When the phone connects, your device will start upgrading the stock firmware.

To start the upgrade process of stock ROM on your Nokia 2.4, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.).

Once you load the file, click the Download button.

You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.

In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.

Once your load the SP Flash tool UI, Tap on the Download option.

Open the flash tool exe file to open the SP Flash Tool User Interface.

Make sure you follow and download all the required files and flash tools on your PC.

Now, without wasting any more time, let’s jump into the firmware installation steps below: Instructions to Install: via SP Flash tool

Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Nokia USB Driversįlash File Name: Nokia_2.4_MT6765_HMDSW_WVR-WW-B01.

Take a complete backup using any method given below.

You need a PC or Laptop with a USB cable.

Make sure to charge your device more than 50%.

But let’s take a quick look at the Stock Firmware importance and firmware details below. Once you’re done with these, you can proceed to the steps below.

Then download and install the USB Drivers and flash tool on the PC as well. Before installing the Stock ROM on your Nokia 2.4, you should download the firmware flash file.